10/22 PACKAGE SPECIFICATIONS
10/22 PACKAGE PRICE
| BUILD YOUR OWN 10/22
We offer a packaged
10/22 rifle in the configuration listed below. It is
configured with the majority of options that our customers request.
However, the options available for the 10/22 are almost endless.
We can meet your requirements and build it in a configuration of
your specifications. See
build your own 10/22.
After many customer
requests, tests and trails, we settled on a Target 10/22 in this
configuration. It is a medium priced rifle that will
produce groups only found in some of the higher priced 10/22 target
Blueprinted barrel and
Unique option is
the blue printed receiver and threaded barrel. We have found that
the receiver barrel bore and face are not always in alignment with
the bolt channel. Machining the receiver face where the barrel
mates, resolves this problem. Also, threading the receiver and
the barrel vs clamped, eliminates any of the downward barrel canting
caused by the factory barrel clamp. We have also started
machining the mounting flat on the bottom of the receiver.
This ensures that the receiver fits square on the aluminum bedding
block. To finish up the receiver group, the bolt is fully
trued, head spaced to match specs, firing pin is ground to the
correct dimensions, and jeweled.
The bolt is head spaced
.0425 and squared up for perfect alignment in the receiver. A head
space with out any play always produces much more consistent and tighter
groups. The firing pin is pinned so that it doesn't have any
vertical movement, causing "flyers". Then we jewel the bolt for
A Bell and Carlson
stock was chosen and it comes in the Anschutz and Anschutz thumbhole
style and is bedded. Most of the wood laminate stocks can be
used little or no extra cost. The factory stock screw is
replaced with a machined aluminum bushing/bedding block and
stainless allen head bolt.
The trigger is
tuned so that it has a crisp clean break.
The barrel is
machined from a Green Mountain stainless heavy barrel blank.
Checking for optimum bore dimensions, the bore is slugged and the
barrel is recrowned at the optimum sweet spot.
Sometimes when you
buy all the parts and assemble a match grade 10/22, there are
problems. As with all Aquila products and services, the rifle
is thoroughly tested before it leaves our shop. When you
purchase this rifle, you can count on it being an accurate rifle
that is ready to shoot.
||Bells Carson Anshutz Style Stock with or
without thumb hole and is pillar beaded
||Aquila tuned and jeweled Ruger bolt
||Stainless heavy Barrel with custom Aquila
||Aquila tuned Ruger trigger set at 2.5 lbs
||Fully blueprinted and receiver
Add $250.00 for an Aquila supplied Rifle
To ORDER a 10/22 Target
click here to review the
To BUILD YOUR OWN RIFLE,