ACTION TRUING |
BUSHING THE BOLT |
BUSHED FIRE PIN
REBARREL MINI 14 |
REBARREL A/R 15
RECHAMBER REMINGTON &
THREAD MUZZLE END OF BARREL |
CUT AND RECROWN BARREL |
INSTALL NEW BOLT HANDLE |
POSITION BOLT SAFETY |
SCOPE MOUNTING AND BORE
SIGHTING | STOCK
BEDDING AND FREE FLOATING |
CLEAN AND INSPECT |
BOLT FLUTING |
CUSTOM ETCHING |
CUSTOM MADE BOLT W/EXT HANDLE
INSTALL LIGHT FIRING PIN & SPRING
receiver bolt face and threads are machined so that they are perfectly
aligned with the bolt channel. The bolt lugs and face are machined to
be in alignment with the bolt body. This process not only trues the
receiver and bolt, but reduces the stress on the bolt and the lug face
caused by the miss alignment inherent from the factory.
process where the receivers raceway is reamed to .705/ and bushing is
machined and added to the existing bolt, reducing the slop between the bolt body and the receiver
a procedure where a busing is machine fitted into the existing firing
pin hole, reducing the slop in the firing pin to ensure exact strike
deal of attention is used to thread, chamber, head space, and face off
muzzle and crown the barrel to ensure that it conforms to exact
tolerances. A range rod is utilized in setting up the barrel in the
lathe so that the chamber is cut to line up with the bore. If the
stock needs to be altered, there may be an additional cost.
||$250.00 (Plus the cost of the barrel)
Add tension sleeve to
cut group size in half.
a number of quality A/R barrels in a number of configurations.
is threaded and the shoulder is cut with exact concentricity with the
A 11 deg
recessed crown is machined after cutting the barrel down.
of configurations are available to meet your needs.
||$70.00 (Plus the cost of the safety)
||$20.00 (Plus cost of sling and swivels)
scope is mounted into the rings, we lap the rings to insure the best fit
possible. All of the mounting screws are torqued to the proper
contact us for any other gun services not listed.
Click here to
review the Ordering Process for Gun Services.